NOURISH infos
Modérateurs : Pachi, gigi, Tricati, Bertrand, rickman, Yeti
- hlmracing
- Messages : 385
- Inscription : 13 juin 2008, 13:35
NOURISH infos
Le pére DAVE NOURISH 88 ans est sur le point de passer la main a un british du SUD
on peut esperer un mail , un catalogue en ligne etc..
penser a faire vos commandes (guides , joints de culasse etc.) avant certainement un déménagement
HENRI
on peut esperer un mail , un catalogue en ligne etc..
penser a faire vos commandes (guides , joints de culasse etc.) avant certainement un déménagement
HENRI
- Graham
- Messages : 484
- Inscription : 05 juin 2012, 21:12
- Localisation : RP
- Tricati
- Messages : 7329
- Inscription : 19 janv. 2007, 21:52
- Localisation : Ouest Lyonnais
- Contact :
Re: NOURISH infos
82 ans le Dave ! c'est déjà pas mal !
- jean-pierre
- Messages : 8490
- Inscription : 25 janv. 2007, 19:43
- Localisation : sud ardeche
Re: NOURISH infos
le compte juste
82 balais + 8 soupapes =90
82 balais + 8 soupapes =90
-
- Messages : 984
- Inscription : 26 févr. 2007, 08:20
- Localisation : thiais
Re: NOURISH infos
se serait vraiment cool un catalogue en ligne ....
pour l'instant tout va bien mais jusqu'a quand???
en tous cas merci pour l'info et si ça bouge faites signes.

pour l'instant tout va bien mais jusqu'a quand???

en tous cas merci pour l'info et si ça bouge faites signes.

- Transgarp
- Messages : 1310
- Inscription : 14 mars 2011, 23:08
- Localisation : Québec
- Contact :
- PPAT
- Messages : 3002
- Inscription : 10 janv. 2013, 11:00
- Localisation : Bonvillers
Re: NOURISH infos
Si quelqu'un cherche un vilo Nourish pour Commando, j'ai un "one billet"...lourd (940 side-car cross).
PPat
PPat
- zerton
- Messages : 15827
- Inscription : 30 janv. 2007, 09:34
- Localisation : Bordeaux, sud gironde
Re: NOURISH infos
Les Nourrish, c'est pas des jerricans portuguaish ?
Je suis pas là....
Je suis pas là....
- Transgarp
- Messages : 1310
- Inscription : 14 mars 2011, 23:08
- Localisation : Québec
- Contact :
Re: NOURISH infos
Nourish revient avec un nouveau proprio en Mars prochain
http://www.nourishengineering.co.uk/page.php?id=0
http://www.nourishengineering.co.uk/page.php?id=0
Announcement
We will be re-commencing the production of billet crankshafts for British motorcycles, from March of 2014. Further details will be found on our products and services page.